In the transportation industry, tonnage calculation is critical for determining transportation charges and assessing the suitability of the load for the vehicle capacity. While traditional methods use kilogram-based weighing, a new measurement method known as LDM (Lademeter) has become widespread in recent years.
What is LDM?
LDM stands for “Longitudinal Distance Meter” and can be translated into Turkish as “dimensional distance meter”. This system calculates tonnage by measuring the length of the loading area of the truck or truck bed in meters.
How to Calculate LDM?
Calculating tonnage with LDM is quite simple. You can do it by following the steps below:
- Measure the length of the load: Measure the height of the truck or truck bed from the floor to the ceiling and the length from the front wall to the rear wall in meters.
- Do the Multiplication: Multiply the height and length you measured by each other. Multiply the result by 1.75.
- Adapt the result to the Tonal Openwork: Round the result to the nearest 50 kg ton ajur.
Example:
Let the height of a truck body be 2.5 meters and the length 6 meters. In this case, the tonnage calculation with LDM is done as follows:
2.5 m * 6 m * 1.75 = 26.25
Rounding up to the nearest 50 kg ton ajur, we conclude that this truck has a carrying capacity of about 1.5 tons.
Advantages of LDM:
- Fast and Easy Measurement: Tonnage can be calculated in seconds without the need for weighing.
- Practical Application: Measurement can be done with a simple tape measure, without the need for any special equipment.
- More Accurate Results: Provides more accurate results according to the type of loading and distribution of the load.
- Saving Time and Money: Saves time and money as there is no need to go to weighing.
- Less Margin for Error: Minimizes the risk of human error.
Lademeter Calculation Logic:
Lademeter calculation is a calculation based on the dimensions of the load. It is usually based on the length, width and height of the load. The calculation is used to show how much space the load will take up during transportation.
Importance of Lademeter Use:
- Cost Calculation: Transportation companies determine transportation costs by calculating the space occupied by loads. This is especially important for optimizing costs in international transport.
- Load Planning: Knowing how much space the load will occupy enables more effective planning of the layout inside the vehicle. Thus, it allows minimization of free space during transportation.
- Efficiency: Organizing loads according to their size makes transportation more efficient. This means both time and energy savings.
- Standardization: Lademeter calculation provides a standard for cost and capacity planning across different transport modes and routes.
Lademeter calculation is an indispensable tool for professionals in the logistics industry. Capacity and cost management in transportation can be done more accurately and effectively thanks to such measurements. This plays a major role in optimizing transport operations, especially in a globalized world economy.
